Reinforcements (or I’m going to need a bigger box)

July 2021 was a looong time ago. Lots of hobby stuff has happened, I just haven’t posted ANY of it for no particular reason.

I’ve been into Chain of Command for a while and have  been collecting a 101st Airborne force.

Looks a little cramped in the box so on the tabletop it looks like this:

HQ, bazooka, three squads, and mortar squad.

I also have two additional bazooka teams, three medics, a sniper, a MG and 4 spare infantry I can use to be a 3 man engineer demo team or to bump up the MG team to have 5 crew. Oh and two Sherman’s and a firefly for reasons.

Finally the other pieces have been completed. Another Sherman which gives me a full tank platoon. A Jeep with a mounted MG. An anti-tank gun and another mortar.

I also grabbed 8 crew for the weapons teams as I don’t really like using riflemen for crew. And another 8 riflemen to get the three squads into full compliance with rifles instead of songs or carbines.

Here’s a scale comparison of the troops.

L to R: Bolt Action, Artizan, Bolt Action, Artizan.

So they are basically done. I have decals for shoulder flashes and should put some markings on the Sherman’s but that’s for some other rainy day.

Charlie Foxtrot Big(ger) Buildings

This past Victoria Day long weekend had pretty crappy weather. As such we stuck indoors for larger portions of the time. So what better time to smash some building together.




I started with the "Brasserie". Comes in simple packaging with one page of instructions. The instruction sheet is pretty basic and only high-lights some of the more intricate pieces.







Here's all the pieces. There was no waste/excess material which helps keep the weight down. Although it is a little daunting being different from the usual MDF kits.








Basic building is complete. Bandage on my finger is not related to this project :)








I left the Brasserie façade off as I'm going to texture the exterior.








Here I taped off all the openings so I wouldn't get textured spray inside the building or on the roof.
I'm planning to shingle over the roof so that's not a big deal if paint got on but I want the shingles to adhere properly.








Up next is the Boulangerie. Same packaging with most pieces punched out.









It had interior walls on the main floor which was nice.








Here's a quick pic of the pain components to be sprayed. Again I left off the façade for ease of texturing. I also had to tape off the Juliet balcony above the doors.








The Café De Normandy was the tallest build (3 floors) and had a "L" shape on the ground floor. I would call this building the fiddliest, but it wasn't that bad.








All the bits. This kit had the most pieces by far.








The dormer window isn't glued on. I have the dormer's peak resting on the roof peak while the glue sets up to keep the correct alignment of the pieces.








What I liked:
No excess material meant less time spent cutting things out.
Kits were fairly intuitive. However, some are available on line.
They look great as is, and I haven't textured them yet or added details like doors windows or shutters.


What I didn't like:
A few of the corners on tabs and other small bits where damaged. This happens as there is no packaged/excess material to keep them from hitting each other. But it was all negligible.
Instructions - I'd have preferred a step-by-step guide.


All in all, I was very happy with these kits. Getting the skeletons together, texturing the corners and taping off areas I didn't want spray paint took maybe 25-30 minutes each with most of the time spent filling the corners and taping.


In my next post I'll show why I textured the corners.


I'm going to spend the next little bit tarting them up as I plan on shingling the roof.

Charlie Foxtrot and Harry Potter

Around the time I was painting the Sarissa large farmhouse and building Chain of Command lists and watching lots of YouTube videos, I stumbled across Charlie Foxtrot Models.

I’d heard of them before and gone through their website once or twice but that was it. I was watching Nick from TooFat Lardies put together a hotel and decided to check them out further.

Well today I heard the doorbell and arrived to see the mailman walking away. I figured it was something I had ordered. My 5 year old pushed open the door and said “look it’s for me” grabbed the box and ran off into the house. (There’s a stamp on the exterior that reads Charlie Foxtrot Models, and his name is Charlie F., so close enough).

After a short foot chase, I got the box back and opened it up.

This will give me 4 medium to large buildings and two smaller ones. Hopefully I can get started this long weekend! Luckily in preparation for his I have some spray cans (textured paint) I purchased especially for this.

Over the last month or so, the oldest has been obsessed with Harry Potter: Hogwarts Battle line of games. We just finished reading the 7th book with him and watched all the movies (books before movies).

I saw that there were several expansion cards so I scoured the Internet. I think we are issuing one.

I enjoy deck builders and Harry Potter so this was a no brainer.

We also played a home brew Russian Civil War game but I’ll post about that this weekend when I have more time.

WWII French Farmhouse Part 2

Well, it’s completed. I finished it on Sunday.

Oathmark Dwarf Champion for scale.

Picture of the front. I just need a name for the store. I’m thinking the Farmer’s wife sells excess produce, dairy  and baked goods inside. I want a funny name but nothing too risqué.

I’m thinking the farmer’s name is Jim Appel (je m’appelle, get it, get it?)

Picture of the rear. I might put down a few more droplets of wash here and there. I was also thinking about putting some cobblestones and straw down inside the archway...

But for now I’m calling it done. Pretty happy with how this one turned out.

WWII French Farmhouse

I’ve been bitten pretty hard lately by the Chain of Command bug.

Ive has paratroop forces for Britain, USA and Germany for quite some time as well as an MDF large farmhouse from Sarissa Precision.

I primed it beige and used Citadel Contrast for the stone work. I brushed on some green wash for weathering and smeared it with my finger.

I wasn’t happy with how this looked so decided to try again.

I got out some trusty spackle and mixed in some water until it was like toothpaste.

I then dabbed it on the surfaces to create a stucco look.

As the building was already assembled, it was difficult to get it consistent around the windows.

Today, with the beautiful weather, I used a medium brown spray paint to lightly dust the exterior walls.

I then used a lighter brown to dry brush the walls, which added depth.

Next I started to paint the windows and doors in white.

I have to finish the sign and the remaining windows and doors. I also have to pick out the stones along the bottom in grey and around the archway.

I’ll probably add some wash down some of the walls to look like dirt and grime.

Here are some  pictures of the progress.